POPPUMP Yugoslavia Technical Center

Tel:(001)3474109611

POPPUMP logo

POPPUMP Yugoslavia Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

D-G2Q FUEL DISPENSER

D-G2Q

D-G2Q FUEL DISPENSER

FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage: 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type: Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose 4.5m

Weight : 215kg.

Dimension(L×W×H) : 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

products links

links

technical archives

    ws into pipe because of adapting one pipe in two fuel dispensers or other leakage. Bottom valve in tank or single valve in pipeline is stuck and damaged, no oil into pump. Oil level is lower than bottom valve or suction nadir. Counter at beginning of operation Due to long and much soft, hose tends to bulge under a certain pressure. Transducer will count as bulging pressure out of certain scope. This trouble can’t be solved through shorten or replace hose. As leakage in bottom valve or pipe, oil flow back into tank between operation interval because of lower oil level in vapor separator and pump. Air in transducer drives to count as next time refueling. The longer interval time the more data jump. Inspect and solve pipeline leakage of oil and air. Unstable flow rate makes large tolerance; air leakage in bottom valve and pipe oil level low tha fuel dispenser n bottom valve bring about much air flow into fuel dispenser. Article III Important notices to dispenser’s maintenance Due to fuel dispenser located in flammable and combustible location, operator should pay much attentions to security preventing accident occur on human and equipment, and strictly abide by the following general requirements: Smoking and open flame is strictly prohibited in filling station in case lead to fire. Maintainer should, in accordance with safety regulations in filing station, not wear shoes with metal nail and chemical fiber easy to generate static. Cut power supply prior to maintain fuel dispenser; pick down V belt then empty oil filled in part where need to be done. Pour oil into container in case of splash out. Repairing tools should be explosion-proof, prohibiting randomly throw in case of generating spark and accident. Pay much attention not to the joint surfaces of seal and metal parts, which would lead to leakage. All components and sections should be clean fuel dispenser ed so to prevent giblets or waste destroying parts. Carefully inspect wire connection after maintaining electric equipment, abstaining new trouble. fuel dispenser

technical specification

    Element Definitions  The data elements used in this standard conform to the definitions specified in ISO 8583 1  with minor exceptions as described below. The use of the data elements may vary slightly  from 1 but the use is clearly described. The conventions for using specific data elements  are described in this section.  Three data elements that are designated for private use in 1 (BITs 48 63 and 123) and are  used to provide information for the control of the message from the POS to the FEP and for  Oil industry specific information. These data elements have a variable length structure that  contains a series of data elements with specific code values. The code values are defined in  Appendix A.  The message control data element (BIT 48) provides information concerning the operation of  the POS and any information about a customer fuel dispenser that is collected manually. This data element  was designed for use with other industry specific standards.  The industry requires the ability to report product data to the host for individual transactions.  This is provided as a separate data element (BIT 63).  Proprietary reconciliation totals (bit 123) provide the ability for industry specific totals.  4.1 Attribute specification  The data element format is specified in terms of the data element attributes - the  representation length and explicit or implied structure. Conventions have been established  for the values of certain data elements. These attributes and conventions are defined in 1 .  In addition this standard provides for variable length fields less than 10 characters long. This  format is denoted LVAR and has a single digit length field (see LLVAR and LLLVAR in 1 ).  The following conventions shall be applied to all data elements:   All fixed length numeric data element values shall be right justif fuel dispenser ied with leading   zeroes.   All fixed length data elements with alphabet fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    Arab Palestine is a “patchwork of open- air prison camps� An escape from these prisons, to something other than semi-free statelets, is suggested by Ali Abunimah, a Palestinian-American, who created and edits the Electronic Intifada website. But it is an escape to Utopia a single state of Israel Palestine where lion and lamb nuzzle down together. Impossible, probably. On the other hand, argues Mr Abunimah, if South Africa could break out of seemingly impossible conflict to find peace and reconciliation, why not Israel? Some 5m Jews and some 5m Arabs, including Israel s sizeable Arab minority, confront each other in land that is controlled, directly or indirectly, by Israel. Splitting the land between them (albeit on a 78% to 22% ratio) seemed a good idea at the time, but its time may have run out. For a start, partition has been so complicated b fuel dispenser y Israeli settlements, many specifically created to bar neat division, that the geographical conditions for two viable states are at vanishing point. The obvious alternative is living together in a single state with equal rights for Jews and Arabs. The huge snag here (apart, that is, from the violence and oppression, the ill-feeling and the fact that Hamas, the Palestinians ruling party, does not officially recognise Israel) is demographic. In a few years, given their higher birth rate, Arabs will outnumber Jews. If, as Palestinians believe is essential, the right of the 1948 refugees to return to live at peace is honoured, the outnumbering would be faster. A democratic Israel Palestine can be envisioned but it could not, at the same time, be a Jewish state, with a Jewish monopoly on power. Which makes it unthinkable for most Israeli Jews. But, argues Mr Abunimah, at one time South Africa s whites thought majority rule unthinkable. Admittedly, the demographics in South Africa were much more fuel dispenser dramatic the blacks outnumber the whites by eight to one. Even so, a peaceful transformation to democracy did for a long time seem unattainable. fuel dispenser