U501-C Pulse sensor

U501-C Pulse sensor

This incremental shaft encoder has been designed for heavy-duty application,especially for use in petroleum & diesel dispensing environments where potentially explosive atmospheres can be expected. It features a rugged and compact construction as well as a wide selection of mechanical and electronic variations.

Materials:

Housing: Die cast aluminum alloy

Bearings: Self-lubricating sintered bronze

Features :

A high advantage in reliability and adaptability.

A large selection of shaft couplings, including couplings with built-in backlash clutch facility.

Standard sealing screws.

The fuel resistant cable can be customized regarding length.

Suit the TATSUNO meter and other meters whose pulse per circle is 60 or 100.

100% EX approved and tested.

Specifications:

Power supply: 5 VDC, fixed or variable

Current Consumption: Standard 10 to 30 mA, max 90mA

Number of Channels: 2

Number of pulses: 50 ppr

Output Signal: Square wave duty cycle 50%+10%.

Phase Shift: 2 channels 90° (25% +5%)

Output Stage: NPN

Output Current: Max. 30mA

Hysteresis: Min. 0.2°

Output freq. Min. 1000Hz

Temperature range: Working -40 to 70degree

RPM: Max 3000RPM

Mounting: With 3 pcs. M4 screws

Weight: Approx. 340 gram. Excl. the cable

Wiring:

Color Channel plug

Green +5V 2

Black CH1 3

Yellow 0V 4

Blue CH2 5

Red +5V 6

--- --- 1

Package:

Cross Weight Dimension

150g/case of 1 130x100x15mm/case of 1

Approval:

The shaft encoder has been tested and granted Ex and EMC approval.The Ex-approval is EX d IIA T3.Ex certificate number is CE991209.

Ordering Specifications:

Product ID Product name

U501-C pulse sensor

Important:

The products should be used in compliance with applicable country, province and local Laws and regulations. Products selection should be based on physical Specifications and limitations and compatibility with the environmentand materials to be handled. HONGYANG makes no warranty of fitness for a particular use. All illustrations and Specifications in this literature are based on the latest products information lable at the time of publication,HONGYANG reserves the right to make changes at any time in price, materials. Specifications and models and to discontinue models without notice or obligation.

conducive to the failure that no oil is sucked. Don’t worry about the phenomenon of cavitation because its probability to occur is low, and the method to prevent it appearance would find when pipeline setting and the design and manufacture of pump. At present, manufacturers have achieved great progress in research to prevent cavitation in pump inlet. The phenomenon is avoidable. Stability The stability of pump is more important technical parameter, which is one of major labels measuring the performance of pump. The good stability of pump is low fluctuation in flow and slow increase of pulsant value as working long time. The 13.6 of JJG667-97 Liquid cubage flow meter stipulates that the flow rate fluctuation not exceed 2.5%, which is requirement for pump stability. Under same operating condition a good stability pump reduce the abrasion of hydraulic components so as to lengthen fuel fuel dispenser dispenser’s service life. Moreover, it is conducive to reduce leakage of measure transducer and enhance the accuracy. Noise Noise is also a symbol of pu fuel dispenser mp’s performance, which relate to fuel dispenser’s noise. The GB/T9081-2001 Fuel dispenser for vehicle stipulates that the noise of fuel dispenser not exceed 80d B and the noise of pump no more than that of fuel dispenser, which is basic requirement for fuel dispenser. Noise is often created from pump of fuel dispenser, computerized fuel dispenser in particular. The pump noise is larg fuel dispenser ely depended upon its stability, cavitation, partial flow speed and oil abrasion, etc. High noise pollutes environment and wastes electricity so as to increase operation cost of filling station. Usage and maintenance Many domestic component manufacturers now produce vane pump, but their products vary from inner structure, choice of material, suction capacity, stability, service life, noise and so on. Thus failure presents largely different. Vane pump should often be inspected and maintained during the operation progress. Specific procedure is as followed: Often inspect the rotati

associated with the requirements of the card　　 issuer (see also chapter 1.6.5 page 10).　　 ItemDesc The Item descriptive text as used by the sales　　 Asc32　　 process.　　 Quantity The number or measure value of the sales line　　 Qty　　 item.　　 Unit The unit of measure of the sales line item.　　 Unit　　 UnitPrice UnitPrice The net price per unit of measure of the sales　　 line item.　　 LineTotal The net value of the sales line item i.e. where　　 Total　　 applicable reduced with the pr fuel dispenser omotion amount　　 andor discount.　　 ReducClass This defines if a promotion reducti fuel dispenser on or　　 Asc1　　 discount applies to this sales line item.　　 P = Promotion　　 D = Discount　　 I = One free Item　　 N = No Reduction　　 fuel dispenser ReducType This defines the method by which the item price　　 Asc1　　 was reduced.　　 P = Percentage　　 V = Value amount on the sales item (unit　　 price)　　 T = Total amount on the sales line　　 N = Not Applicable　　

London s Bankside The city s other shore Europe The return of Sidney Lumet French protests An old maestro The phoney revolution Michelangelo s drawings Spain and ETA fuel dispenser Heaven on earth Peace talk fuel dispenser Economic and Financial Indicators Belarus s election A dictator dictates fuel dispenser Overview German state elections The politics of shrinking Output, demand and jobs Italy Prices and wages Sicilian vespers